Pir Set Up - ESP GuardCam WF-SAR Installation And Operation Manual

PIR Set Up

For optimum performance it is recommended to mount the GuardCam WF-T 1.8 to 2.5 m above the
ground. The PIR has a range of 12m over a 140 degree angle.
2.5m
PIR technology provides much better target capture if movement is across the face of the PIR. Aim
the PIR to achieve the highest chance of this happening.
Setting the Time and Lux control
 Time control: The time the floodlight is illuminated after triggering
can be set between 30 seconds to 7 minutes. Turning the dial
clockwise will increase the time, turning counter-clockwise will
reduce the time.
 Lux control: PIR activation of the floodlight is also controlled by a
photocell to ensure illumination only occurs when required.
Adjustment can be set between darkness , fully clockwise and
daylight (walktest), fully anti clockwise.
 To perform a walk test turn the dial fully anti clockwise. When the walk test is completed adjust
the dial clockwise to the " + " side to your desired light on time (we recommend this be at least
2 minutes to ensure lighting of the area is sufficient for the minimum recording time.
140º
9