Paper Feed Roller Assy - Brother IntelliFax-4750 Service Manual

1.26 Paper Feed Roller ASSY

(1) Unhook the latch (arrow •) provided on the underside of the plastic frame by using a small
flat screwdriver and pull out the gear 21 (arrow ‚).
(2) Place the main chassis rightside up.
(3) At the right end of the paper feed roller shaft, pull up the pawl of the bushing (arrow ƒ) with
the tip of a flat screwdriver and move the paper feed roller ASSY to the left (arrow „). Then
take out the bushing and paper feed roller ASSY.
(4) Remove the joint (arrow ...).
n n
Reassembling Notes
• When setting the gear 21 back into place, insert it and turn it so that its D-shaped end becomes
fitted with the D-shaped end of the paper feed roller ASSY.
IV - 50