Table of Contents
Advertisement
Searching for Video and Other Data
Timeline Search Mode
To perform a standard timeline search for video and other data, complete the following steps:
1
1. In the camera or view tree, select one or more sources (cameras, audio inputs, POS, and so on). To search
every source on an exacqVision server, check the box next to the server in the Camera Selection Tree (and
then deselect any sources individually if desired). You can also select individual sources using the check
boxes next to each camera.
2. Select the date and time you want to search. Click Search.
NOTE: If the client computer and a connected server are located in different time zones, the Client Time
and Server Time options are also available. Search result listings are applicable to the selected time zone,
and the time offset between the time zones is shown in parentheses.
3. When your search is complete, the camera names selected appear under the timeline with color-coded
recording bars representing recorded data. A color legend for the recorded video bars is located below
the Search Range area; if you cannot see it, click the horizontal bar between the video window and the
search results and drag it up.
NOTE: Alternatively, you can perform a quick search on the Live Page by right-clicking a video window, selecting
Search from the pop-up menu, and selecting whether you want to search for video from the selected window or
from all windows in the current layout. That procedure opens the Search Page with results from the last two hours
from the selected camera or cameras.
2
3
www.exacq.com
76
+1.317.845.5710
USA (Corporate Headquarters)
+5255.56080817
Mexico
+44.1438.310163
Europe/Middle East/Asia
Advertisement
Table of Contents
