Searching For Video And Other Data - Exacq Vision User Manual

Searching for Video and Other Data

Searching for Video and Other Data
To search for video and other data, complete the following steps using the figure on the previous page as a guide:
1. In the camera, group, map, or view tree, s In the camera, group, map, or view tree, select one or more sources (cameras, audio inputs, POS, and so on). To
search every source on an exacqVision server, check the box next to the server in the Camera Selection Tree search every source on an exacqVision server, check the box next
(and then deselect any sources individually if desired). You can also select individual sources using the check (and then deselect any sources individually if desired). You can also select individual sources using the check (and then deselect any sources individually if desired). You can also select individual sources using the check
boxes next to each camera.
2. Select the date and time you want to search. elect the date and time you want to search. Click Search.
NOTE: If the client computer and the server are located in different time zones, you can select between Client If the client computer and the server are located in different time zones, you can select between Client If the client computer and the server are located in different time zones, you can select between Client
Time or Server Time. Search result listings Time or Server Time. Search result listings are applicable to the selected time zone, and the time offset between
the time zones is shown in parenthes
to a server in another time zone. to a server in another time zone.
3. When your search is complete, the camera names selected appear When your search is complete, the camera names selected appear under the timeline with color
recording bars representing recorded data. A color legend for the recorded video bars recording bars representing recorded data
Search Range area; if you cannot see it, click the horizontal bar between the video window and the search Search Range area; if you cannot see it, click the horizontal bar between the video window and the search Search Range area; if you cannot see it, click the horizontal bar between the video window and the search
results and drag it up.
complete the following steps using the figure on the previous page as a guide: complete the following steps using the figure on the previous page as a guide:
elect one or more sources (cameras, audio inputs, POS, and so on). To
shown in parentheses. The Client Time and Server Time options are visible if you are connected es. The Client Time and Server Time options are visible if you are connected
www.exacq.com www.exacq.com
to the server in the Camera Selection Tree
applicable to the selected time zone, and the time offset between
under the timeline with color-coded
+1.317.845.5710
+5255.56080817
+44.1438.310163
+31.485.324.347
76
is located below the
USA (Corporate Headquarters) USA (Corporate Headquarters)
Mexico Mexico
United Kingdom United
Europe Europe