Exacq exacqVision Start User Manual page 26

Many IP camera settings that are not available in the exacqVision software can be accessed through the camera's
web page. To view an IP camera's web page, click the hyperlink in the IP Address field. If you don't see a hyperlink
beside the IP Address field, it could be for one of two reasons:
A. You are not logged in to the operating system with administrative privileges. You must log in to operating
system account with administrative privileges to access the hyperlink.
B. Your client computer is not located on the same IP subnet as the IP camera. This could occur if you are
using the client from a home computer to access a server at your office, for example. This restriction
should cause few issues because camera website settings are typically changed only during initial
configuration.
IMPORTANT NOTE
www.exacq.com
26
+1.317.845.5710 USA (Corporate Headquarters)
+5255.56080817 Mexico
+44.1438.310163 Europe/Middle East/Asia