Alarm Outputs - Exacq exacqVision Start User Manual

Alarm Outputs

The Alarm Outputs page allows you to assign a name and configuration to the alarm outputs on hybrid systems
and certain IP cameras.
1. Enter a name for each alarm output in the Alarm Name column.
2. Configure the alarm output's Normal State as Hi (5VDC) or Lo (0VDC).
3. The Status column indicates whether the alarm output is in its normal (green) state or in its alarm (red)
state. The output can be triggered to alarm state by an event configured on the Event Linking page.
4. When you are finished configuring alarm outputs, click Apply.
www.exacq.com
38
1
4
+1.317.845.5710
+5255.56080817
+44.1438.310163
2 3
USA (Corporate Headquarters)
Mexico
Europe/Middle East/Asia