Table of Contents
Advertisement
The following features are available on the Drive tab:
1. The system drive ("C:\" in Windows, or "/mnt/edvr/0" in Linux) is reserved for the exacqVision software
and operating system and is not enabled for video storage. Do not record video to this drive.
2. The storage drives are listed below the system drive.
3. To enable a drive for video storage, select its Enabled: box.
4. To adjust the maximum amount of drive space that can be used for data storage, adjust the Video Space
slider for each storage drive. NOTE: Performance can decrease if you set the Video Space slider greater
than 85%.
5. Used Space displays how much of the hard drive capacity is currently full.
6. Status displays the current state of the hard drive.
7. Days of Recorded Video indicates the age of the oldest video recorded on this system.
8. Expiration Configuration allows you to set minimum or maximum time periods for video on each server to
be stored. For example, you could configure video to be stored for at least 30 days before it is deleted, or
for video to be deleted after no more than 7 days. See the following IMPORTANT NOTE before using this
feature.
1
2
8
www.exacq.com
3
4
+1.317.845.5710
+5255.56080817
+44.1438.310163
41
5
6
5
7
USA (Corporate Headquarters)
Mexico
Europe/Middle East/Asia
Advertisement
Table of Contents
