Table of Contents
Advertisement
B
Regulatory Notice
Federal Communications Commission (FCC)
Radio Frequency Interference Statement
The Exacq Product contains incidental radio frequency-generating circuitry and, if not installed and used properly,
may cause interference to radio and television reception. This equipment has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart J of Part 15 of the Federal Communications
Commission (FCC) Rules. These limits are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a residential area may cause
interference to radio and television reception, in which case users will be required to correct the interference at
their own expense. If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or
more of the following measures: Reorient the television or radio receiving antenna, and/or relocate the Exacq
product and the radio or TV with respect to each other. If necessary, users should consult the manufacturer or an
experienced radio/television technician for additional suggestions. Users may find helpful the following booklet
prepared by the Federal Communications Commission: "How to Identify and Resolve Radio-TV Interference
Problems," which is available from the Government Printing Office, Washington DC, 20402 (stock #004-000-00345-
4).
CE Notice
Marking by the
symbol indicates compliance of this device to the EMC directive of the European
Community. Such marking is indicative that this device meets or exceeds the following technical standards:
- EN55022: Conducted Emissions
- EN55022: Radiated Emissions
- 61000-4-2 Electrostatic Discharge
- 61000-4-3 Radiated Immunity
- 61000-4-4 Electrical Fast Transients
- 61000-4-5 Surge Immunity
- 61000-4-6 Conducted Immunity
Electromagnetic compatibility (EMC) requires the use of shielded cable and ferrite cores for all wiring added by the
user. Good shielding techniques should be applied in the user's system.
www.exacq.com
87
+1.317.845.5710
USA (Corporate Headquarters)
+5255.56080817
Mexico
+44.1438.310163
Europe/Middle East/Asia
Advertisement
Table of Contents
