Table of Contents
Advertisement
Video Output
On hybrid systems, the Video Output page allows you to configure your security spot monitor for touring
(switching) between analog video cameras in various display modes.
1. Select the cameras that you want to include in the tour from the Camera in Tour check box. This displays
video from the camera in the video window.
2. Select a Layout mode.
3. Move the Dwell Time slider to configure the length of time before the monitor switches to the next
camera. The Dwell Time range is from 1 to 60 seconds.
4. When you are finished configuring the video output, click Apply to start the tour.
www.exacq.com
39
1
+1.317.845.5710
USA (Corporate Headquarters)
+5255.56080817
Mexico
+44.1438.310163
Europe/Middle East/Asia
2
3
4
Advertisement
Table of Contents
