Description; Tools And Accessories - Hilti DD130 Operating Instructions Manual

2. Description

The DD 130 is an electrically powered diamond core drilling machine designed for hand-held use or for mounting
on a drill stand. It is suitable for wet or dry core drilling.
Use as intended
The DD 130 is designed for drilling through holes and blind holes in mineral materials.
Applications:
With / without drill stand
Hand-held / dry
Hand-held / wet
Hand-held / wet
Drill stand / wet
Drill stand / wet
When drilling in an upwards direction, a wet-type vacuum cleaner must be connected to the water collection system.
● Horizontal drilling with vacuum attachment is per-
missible only when an additional means of securing the
drill stand is employed. The drill stand may be used for
overhead drilling only when fastened by an anchor or
by means of a quick-release brace.
● Drilling into materials containing asbestos is not per-
missible.
● Changes or modifications to the tool are not permis-
sible.
● To avoid the risk of injury, use only original Hilti acces-
sories and additional equipment.
● Observe the information printed in the operating
instructions concerning operation, care and mainte-
nance.

3. Tools and accessories

Designation
Vacuum pump
Quick-release brace
Water collector system for hand-held use
Water collector system for drill stand use
Drill stand
Wheel assembly
DD-CS M12S-SM clamping spindle
DD-CN SML clamping nut
Core bit diameter
With dust extraction,
Without water collection system, 12– 62 mm dia.
With water collection system,
Without water collection system, 12–152 mm dia.
With water collection system
12–162 mm dia.
12– 62 mm dia.
12–132 mm dia.
● The tool is intended for professional use.
● The tool may be operated, serviced and repaired only
by authorised, trained personnel. This personnel must
be informed of any special hazards that may be encoun-
tered.
● The tool and its accessories may, nevertheless, pre-
sent hazards when used incorrectly by untrained per-
sonnel or when used not as directed.
Items supplied
The items supplied are: core drilling machine and oper-
ating instructions.
Drilling direction
All directions
Not upwards
All directions
Not upwards
All directions
47034
370462
370460
370461
232228
251830
251834
Item no.
9870
17