Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mega Lite Pro Color Strip
Summary of Contents for Mega Lite Pro Color Strip
- Page 3 Check that the unit has not been damaged during transport Protection Against Fire 1. Maintain a minimum of 1 foot distance from any type of flame. 3. Replace fuse only with the specified type and rating. 4. Do Not install the unit to close to a heat source. 5.
-
Page 4: Mechanical Specifications
Technical Information Part Numbers Fixture 3030– Pro Color Strip Mechanical Specifications DMX Connectors: 3-pin & 5 Pin XLR connectors 40” Power Connection: Neutrix Power Con in/Out Thermal: Maximum ambient temperature 40° C Maximum surface temperature 60° C Fastening System: Single Mounting Yoke & Security Eye bolt... -
Page 5: Main Power Connection
Main Power Connection Caution! Do not connect fixture to a dimmer system. This unit has Auto switching power supply. It will respond to 110V or 220V automatically This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating. The occupation of the connection-cable is as follows: This fixture is equipped with an electronic power supply that will let the unit operate from 90V to 240V from 50Hz to 60Hz Cable (USA) -
Page 6: Dmx Profile
DMX Profile Pro Color Strip Mode A (3 Channel) DMX Chanel Function Description Value LED Color Red LED intensity 0-255 LED Color Green LED Intensity 0-255 LED Color Blue LED Intensity 0-255 Pro Color Strip Mode P (54 Channel) DMX Chanel... -
Page 7: Main Control Menu
Main Control Menu CONTROL BOARD The control board on the fixture base is your interface to access and control all the functions on the unit. Its digital display gives you a code view of the options and functions. The following will explain each function and its options. Menu Down Enter Sound Flash... - Page 8 Fade Scroll This function allows you to fade the LED’s on the whole strip from one color to another. Press Enter use the up/down keys to select desired fade speed settings. Press Enter to confirm the settings. Flash Scroll This function allows you to change the LED’s on the whole strip from one color to another. Press Enter use the up/down keys to select desired color change speed settings.
-
Page 9: Rigging The Fixture
Replacing the power cable: If the power cable of this device becomes damaged, it has to be replaced by authorized dealers or trained professional only. Should you have further questions , please contact your dealer. Parts List 4050-case 8 Pro Color Strip Road Case 3030-pcb Main PCB card 3000-triled Single Tri Chip LED... - Page 10 Mega-Lite 5718 Kenwick St San Antonio, TX 78238 Ph 210-684-2600 Fax 210-855-6279 www.mega-lite.com / info@mega-lite.com...
Need help?
Do you have a question about the Pro Color Strip and is the answer not in the manual?
Questions and answers