Summary of Contents for Mega Lite N-E COLOR Cannon
Page 3
Check that the unit has not been damaged during transport Protection Against Fire 1. Maintain a minimum of 1 foot distance from any type of flame. 3. Replace fuse only with the specified type and rating. 4. Do Not install the unit too close to a heat source. 5.
Technical Features Part Numbers Fixture Fixture Fixture Fixture 4025– N-E Color Cannon Mechanical Specifications DMX Connectors: 3-pin XLR connectors 7.5” 3.25” 4.75” Power Connection: Neutrix Power Con in/out Thermal: Maximum ambient temperature 40° C 3.5” Maximum surface temperature 60° C...
Main Power Connection Caution! Do not connect fixture to a dimmer system. This unit must be earthed. (electronically grounded) Replace fuse only with the specified type and rating. AC 100V 50Hz-60Hz The occupation of the connection-cable is as follows: Cable (USA) Cable (EU) International Black...
10 times the weight for 1 hour with out any harming. Installation should be checked at least once a year by a skilled person. DMX Profile N-E Color Cannon DMX profile DMX Channel Function...
Main Control Menu AUTO The control board on the fixture is your interface to access and control all the functions on the unit. The following will explain each function and its options. DMX Signal Sensor There is a red LED below the dipswitch settings that will flash to indicated that there is signal present. If the red LED is not flash- ing please check your signal to make sure you are sending DMX correctly.
Need help?
Do you have a question about the N-E COLOR Cannon and is the answer not in the manual?
Questions and answers