Detecting And Changing The Ip Address - HIKVISION Network Camera User Manual

User Manual of Network Camera

1.1.2 Detecting and Changing the IP Address

You need the IP address to visit the network camera.
Steps:
1. To get the IP address, you can choose either of the following methods:
 Use SADP, a software tool which can automatically detect the online network cameras in
the LAN and list the device information including IP address, subnet mask, port number,
device serial number, device version, etc., shown in Figure 2-3.
 Use the client software to list the online devices. Please refer to the user manual of client
software for detailed information.
2. Change the IP address and subnet mask to the same subnet as that of your computer.
3. Enter the IP address of network camera in the address field of the web browser to view the live
video.
Notes:

The default IP address is 192.0.0.64 and the port number is 8000. The default user name is admin, and
password is 12345.

For accessing the network camera from different subnets, please set the gateway for the network camera after
you logged in. For detailed information, please refer to Section 5.3.1 Configuring TCP/IP Settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
SADP Interface
Figure 1-3
2