Log Set Assembly: LOGS-SL550TRS-D
Model: SL-550TRS-IPI-D
STEP 1.
CAUTION: Logs are fragile!
Carefully remove the logs from the packaging.
STEP 2.
LOG #1 (SRV2065-704) Place log #1 on left at side of
the burner assembly. Pull the log and slide it to the right
until the notches under the log are in the burner grooves.
STEP 3.
LOG #2 (SRV2065-703) Place log #2 on the grate bar
and push it back against the refractory. The pilot should
be centered within the large notch on log #2.
Heat & Glo • SL-750TRS-IPI-D, SL-550TRS-IPI-D, SL350TRS-C • InD • 2065-985 Rev. o • 3/07
LOG NOTCHES
LOG PLACEMENT
INSTRUCTIONS
3 3
1 2 2
1
1
1
2 2
1 1
4 4
5 5
2065-935
47