Heat & Glo SL-750TRS-IPI-D Owner's Manual page 46

LOG #3 (SRV540-702): Position the log #3 ("burned-out" area facing to the right) so that the back end is on top of log #2.
The left edge of log #3 should be touching log #1 and the second grate bar from the left.
LOG #4 (SRV530-705): Position log #4 so that the "burned-out" section of the log is facing the back of the unit. Center the
left end against the burner tab and place the right end in the indent of log #3. (The notch on the bottom of this log should
straddle the 2nd grate bar).
LOG #5 (SRV530-703): Position log #5 ("burned-out" section facing right) so that the bottom is centered and rests up
against the 1st grate bar and the top is leaning into the indent of log #1.
Heat & Glo • SL-750TRS-IPI-D, SL-550TRS-IPI-D, SL-350TRS-C • InD • 2065-985 Rev. o • 3/07
46
3
4
5
Indent