Using Voice Message Notification; Using An Optional Headset - Uniden XDECT SSE35 Series Owner's Manual

Intercom
• Whenever the phone is in standby, you can make an intercom call between handsets
without using the phone line.
• You can make an intercom call from any handset, but only two handsets can be in
an intercom call at any time.
• If an outside call comes in during an intercom page, the phone cancels the page so
you can answer the incoming call.
• If an outside call comes in during an intercom call, press TALK/FLASH to hang up the
intercom call and answer the outside call.
To...
make an intercom page
cancel a page
answer an intercom page
leave an intercom call

using Voice Message notification

• If you subscribe to a voice mail service, your phone can notify you when you have a
new message. This feature supports Frequency-Shift Keying (FSK) notification. The
voice mail service provided by your service provider is independent from the built in
answer machine of the SSE35. Contact your voice mail provider for information.
• When you have new messages, the display shows a message icon. Press MENU/OK
and select Messages and select Voicemail. The system dials the voice mail access
number and then plays your messages. After you listen to your messages, the
message icon turns off. If it doesn't, you can reset it from the Advanced Setup/VMWI
Reset menu.

using an optional headset

You can use a standard telephone headset (2.5mm diameter jack) with your handsets.
To purchase headsets, visit our website;
www.uniden.com.au for Australia or
www.uniden.co.nz for New Zealand.
• To install a headset, remove the headset jack cover and insert the headset plug into
the jack.
• Just make and receive calls as usual, and use your headset to talk to the caller after
the call connects.
• While you connect a headset, the handset automatically mutes the earpiece.
22
Press...
Select Hold/Transfer from the menu. Select the
station you want to talk with, or All to page all
stations. When another handset accepts the page,
you will be in an intercom call.
END/CLEAR.
TALK/FLASH.
END/CLEAR. Both handsets return to standby.