Using Special Features; Adjusting The Base Ringers; Using The Audio Boost; Dnd (Do Not Disturb) Mode - Uniden XDECT SSE35 Series Owner's Manual

adjusting the Base ringers

Visual ringer
The visual ringer blinks for the following conditions:
• Incoming call - outside line
• Incoming call - page
You can change the brightness of the base visual ringer. The VISUAL RINGER switch is
on the right-hand side of the base. Slide the switch to HIGH, LOW, or OFF. (It doesn't
affect the audio ringers.)
audio ringer
The RINGER key is also on the right-hand side of the base. Each time you press the key, it
will cycle through 4 ringer tones and 2 melodies.

using the audio Boost

You can increase the earpiece volume for normal calls and intercom calls. During a call,
press BOOST. Press BOOST again to turn it off.

DnD (Do not Disturb) Mode

• You can silence the ringers on the base and all handsets at the same time. It doesn't
affect the visual ringers.
• With the phone in standby, press and hold DND on the base. The phone automatically
turns on the answering system and shows DND Mode On in the display on each
handset. (The answering system answers any incoming calls without playing
anything through the speaker.)
• You can also press and hold #/DND on the handset. The DND Mode menu displays.
You can choose to have DND mode always on or select a duration from 1 - 9 hours.
• To cancel, press DND or #/DND again.
# If you turn the answering system off while DND mode is on, the phone turns off
DND mode.
18

usIng speCIal Features