Call Info; Using The Belt Clip - Uniden XDECT SSE35 Series Owner's Manual

Reading the Display
The table below shows some of the possible icons and what they mean. Since the icons
appear based on what you're doing with the phone, you won't ever see all of these icons
at the same time.
Icon
P
ANS ON

using the Belt Clip

To attach the belt clip
1. Line up the holes on each side of the handset.
2. Insert the belt clip into the holes on each side of the handset.
3. Press down until it clicks.
To remove the belt clip
Pull either side of the belt clip to release the tabs from the holes.
Status
icons
1300366895
Status
Info
What it means
• The volume of the earpiece is boosted (see page 18).
• The ringer is turned off: this handset will not ring when a call
comes in.
• You have a voice message waiting (see page 22).
• Privacy Mode is on: no other handset can use the line or join your
call.
• The speakerphone is on.
• The battery is 1) fully charged, 2) half charged, 3) getting low, or
4) empty.
• T-coil mode is on.
• Answering system status.
• Energy saving mode is on (transmission power reduced).
Current

call info

9