Using Special Features; Using Voice Message Notification - Uniden XDECT 7015 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Using Voice Message Notification

This feature supports frequency-shift keying (fsk) message

notification. Contact your voice mail provider for more details.

If you subscribe to a voice mail service, your phone

can notify you when you have a new message

waiting. When you have new messages, the voice

message icon

new message light (at the top of the handset1 blinks.

Setting Up Your Voice Mail

When you sign up for a voice mail service, your

service provider should give you an access number. If you don't have

this information, contact your provider before you start.

With the phone in standby, open the menu.

Select

Handset Setup, then select Edit Voice Mail. (You have

to program the voice mail access number separately for each

handset.1 For the New Zealand model the Telecom access

number (0832101 is pre-programmed.

Enter your access number exactly as you would dial it. You can

enter a total of 20 digits. If you need the phone to wait for a few

seconds between digits (to wait for the service to answer, for

example1, press

seconds isn't long enough, you can insert as many pauses as

you need, but each pause counts as one digit. Press

when you're finished.

Getting Your Messages

Press

MEssAGEs

handset.

Resetting the voice message indicator

If the voice message icon remains after you check your messages,

you can reset it. Press and hold

seconds1.

Your handsets will beep during this process: just ignore them.