The last scene of the most recent recording
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
To cancel the operation
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.
• When PLAY/EDIT mode is selected, you can do this
operation by touching
• You can do this operation also by selecting [END
SEARCH] in the menu.
Searching manually – EDIT
You can search for the start point while
viewing the pictures on the screen. The sound
is not played back during the search.
Slide the POWER switch to select the
Downloaded From VideoCamera-Manual.com Manuals
Appears only with a
and selecting [END
(to go forward) and
release it at the point where you want
the recording to start.
Reviewing the most recently
recorded scenes – Rec review
You can view a few seconds of the scene
recorded just before you stopped the tape.
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode.
The last few seconds of the most recently
recorded scene are played back. Then, your
camcorder is set to the standby mode.