Searchingfor The Starting Point; (End Search); Searching Manually (Edit Search) - Sony HANDYCAM DCR-HC26 Operating Manual

Searchingfor the starting point
Make sure that the CAMERA lamp
lights up (p. 24).
[END SCH] (END SEARCH) ',,','ill not
work once you eject tile cassette after you
have recorded on tile tape.
Touch _ -* [PAGE1], then touch
[END SCR].
Touch here again to cancel Ihe operation.
The last scene of the most recent
recording is played back lk_r about 5
seconds, aud the camcorder enters the
standby mode at the point where the last
recording has finished.
• [END SCH] will not work correctly when
lllerc is a blimk section between recorded
sections on tile tape,
• This operation is also available when lhe
POWER swilcb is sel 1o PLAY/EDIT.
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
1
Touch _ --* [PAGE1] --*
[MENU].
2
Select _ (CAMERA SET) with
I_/1_, then touch [EXEC].
3 Select [EDITSEARCH] with I_/
I_, then touch [EXEC].
4 Select [ON] with I_/1_,
then touch [EXEC] -_ I_.
5 Touch and hold _ (to go
backward)/[_ (to go forward)
and release it at the point where
you want the recording to start.
3O