Step 2: Charging The Battery Pack - Sony Handycam DCR-PC330 Operation Manual

Step 2: Charging the
battery pack
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (M series)
to your camcorder.
b Notes
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (M series) (p. 119).
• Do not short-circuit the DC plug of the AC Adaptor
with any metallic objects. This may cause a
malfunction.
• Use a nearby wall outlet when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
outlet immediately if any malfunction occurs.
DC IN jack
Power cord
To the wall outlet
Downloaded From VideoCamera-Manual.com Manuals
Battery
DC plug
AC Adaptor
1
Slide the battery release lever and
remove the battery terminal cover.
Battey release lever
2
Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
3
With the b mark on the DC plug
facing the jack cover, connect the AC
Adaptor to the DC IN jack on your
camcorder.
b mark
4
Connect the power cord to the AC
Adaptor.
5
Connect the power cord to the wall
outlet.
,continued
13
Getting started