Sony Handycam DCR-PC330 Operation Manual page 9

3
Start recording while checking the subject on the LCD screen.
The date and time is not set up in the default setting. To set the date and time, see page 18.
a
Remove the lens cap.
b
Press OPEN and
open the LCD panel.
c
While pressing the
green button, slide
the POWER switch
down to light up the
CAMERA-TAPE lamp.
The power turns on.
d
Press START/STOP.
Recording starts. To
change to standby mode,
press START/STOP again.
4
View the recorded picture on the LCD screen.
a
Slide the POWER
switch repeatedly
until the PLAY/EDIT
lamp lights up.
b
Touch
c
Touch
start the playback.
To stop, press
To turn off the power, slide the
POWER switch up to (CHG)
OFF.
Downloaded From VideoCamera-Manual.com Manuals
(rewind).
(play) to
.
9
Quick Start Guide