Searching Manually (Edit Search); (Rec Review); Searching Quickly For A Desired Scene (Zero Set Memory) - Sony Handycam DCR-HC62 Operating Manual

$÷arch}_g for the starting point (go_ti_ue_}
You can search for the start point to start
the next recording while viewing tile
pictures oil the screen. The sound is not
played back during the search.
Make sure that the CAMERA-TAPE
lamp lights up (p. 22).
1 Touch _.
1
2
Touch and hold [_ (to go
backward)/[_ (to go forward)
and release it at the point where
you want the recording to start.
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 22).
Touch _ -+ [_.
1
E_1_ EDIT EZE1_
Tile last 2 seconds (approx.) of tile most
recently recorded scene are played back.
Then. your camcorder is sel
to standby.
Make sure that the PLAY/EDIT lamp
lights up (p.
26).
II._IREW
PLAY
STOP
DISPLAY
ZERO SET MEMORY
4
/ During playback, press ZERO
SET MEMORY on the Remote
Commander at a point you want
to locate later on.
The tape counter is reset to "0:00:00"
and +0÷ appears on tile screen.
,o*
If tile tape counter is not displayed,
press DISPLAY.
2
Press STOP when you want to
stop playback.
3O