"Privilege Type" drop-down menu.
Its access privilege will then be displaye d. You can alter its settings by allowing
or denying access to other cameras using the checkboxes instead of accepting
the defaults.
6.1.5 Disk Setup
Once you install a hard disk to the recor der, you would need to i nitialize it so
that it can be ready for recording. Y ou can obtain basic information about the
disk you installed in this page.
To initialize it, simply click the "Format" button.
You can also connect external USB thum b drive to the recorder for firmware
upgrade.
For instructions to install a hard disk to the recorder, refer to page 10.
To obtain detail information about t he disk, go to "System Options" >> "Disk
Status".
51