Table of Contents
Advertisement
Recording can be manually started when viewing live video. If the selection focus
is somewhere in the green highlighted area shown above, press the "Left" button
on the remote will move the focus to the manual recording icon. Press the
"ENTER" button on the remote to start recording right away.
You should see an on-screen text notification indicating the recording has been
started.
Alternatively, you can press the "REC" button on the remote start recording of
the current viewing channel right away. Press it again to stop.
7.3 Take snapshot
Before taking a snapshot of the live video, please make sure a FAT32 formatted
USB drive is plugged into the NVR. If you had "Manual recording" icon selected,
press the "Down" button on the remote to select the "Snapshot" icon. Press the
"ENTER" button on the remote to take a snapshot.
You should see an on-screen text notification indicating that a snapshot of the
video has been taken.
86
Advertisement
Table of Contents
