Connect To The Nvr; Use Device Search Utility - Planet NVR-420 User Manual

4-ch network video recorder with hdmi

Hide thumbs Also See for NVR-420:

Table of Contents

3. Connect to the NVR

There are various ways you can connect to the NVR and below are the

suggested methods for different network setup:

The NVR is placed in a network with a DHCP serv er: Connect to the

NVR by using "Device Search" Utility.

The NVR is placed in a network without DHCP server (or you are

connecting to it directly): Access NVR with its default IP (192.168.0.20).

If the NVR is placed in a corpor ate network or a local area netw ork where a

DHCP server is already presented, please install the "Device Search" utility from

the bundled CD disk.

To begin, launch the "Device Se arch" utility from the CD and proceed with the

installation.

Table of Contents