3. Found cameras should be listed and simply select a camera from the list and
press "Configure".
4. Its corresponding informati
Information" section. Enter its usernam e and password and select the channel
ID and name the camera.
5. Click on "Detect" to establish c
camera. If connection establishes succe ssfully, camera's detaile d information
should be polled and displayed as below.
6. Adjust its video format, frame rate, re solution or bitrate...etc if you wish. You
can also click on the "Preview" to preview the live video of the camera.
Click "Add" to finish adding the camera.
If cameras are marked with "*" in the search result, it means those cameras
are already configured and connected to NVR.
on should be displayed in the "Camera
onnection between the recorder and the
53