Event Configurations; General Settings - Planet NVR-420 User Manual

4-ch network video recorder with hdmi

Hide thumbs Also See for NVR-420:

Table of Contents

6.3 Event Configurations

The "Event Configurations" section allo ws users to define conditions that

constitute an event, its corresponding trig

triggered. Such setting can reduce the management overhead and notify the

administrator only when it's necessary.

The general settings section can help y ou quickly configure when an event is

triggered, how often events are trigger ed and the corresponding actions when

events are triggered.

Start the event configuration by defining the general settings:

Define when an event will be triggered.

Choose "Always" or "Only during..." under "Event Trigger Duration".

For the "Only during..." option, choos e the days by using the check-box

and then define the time range in those days in the "Start Time" and "End

Time" fields that you would like the event trigger function to be enabled.

How often an event is triggered

Set a time interval under "Event Tr

events are triggered.

Trigger action

Now that you have the ev ent trigger duration and in terval defined, choose

what action to be taken during an event trigger:

You can choose to have the recorder send out the first fe w frames of the

video recorder upon an event is triggered.

ger action and whe n it will b e

igger Interval" to define how often

Table of Contents