Cabinet Door Removal - KitchenAid KFRS271TSS Installation Instructions And Use & Care Manual

The door(s) can be removed if necessary to gain access to the
inside of the cabinet area below the grill.
Style 1 (external hinge pin)
To Remove the Door:
1. Open the door.
2. Lift door to slide door hinge pins from hinge brackets on
cabinet.
A. Door hinge pin
B. Hinge bracket
3. Repeat steps 1 and 2 for the other door if necessary.
To Replace the Door:
1. Position hinge pins on the door with the hinge brackets on
the cabinet. Gently push down to slide the pins into place.
A. Door hinge pin
B. Hinge bracket
2. Repeat Step 1 for the other door if necessary.
Style 2 (internal hinge)
To Remove the Door:
1. Open the door to the full open position.
2. Locate and remove the 4 door hinge mounting screws.

Cabinet Door Removal

A
3. Pull the door away from the center to slide the door hinges
out of the slots in the frame.
B
4. Repeat steps 1 through 3 for the other door if necessary.
To Replace the Door:
A
1. Slide the door hinges into the slots in the frame and push in
to seat hinges.
B
2. Locate the 4 hinge screw mounting holes through the top and
bottom of the frame and replace the 4 screws. Do not tighten.
3. Check and adjust door then tighten the screws. See "Cabinet
Door Alignment."
4. Repeat steps 1 through 3 for the other door if necessary.
A. Top screws (2 - underside of frame)
B. Bottom screws (2)
A
B
37