Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. 1.2 Packing List 1 x ASM-CDV (with EBM-CDV inside) 1 x Quick Reference Guide ...
5 ~ 500Hz, 30min/axis Shock Protection With CF/ SSD: 10G, IEC 60068-2-27, Half Sine,11ms Dimension (W x D x H) 7.2” x 10.1” x 1.0” (182mm x 257mm x 25mm) 3.3lbs (1.5Kgs) Weight VESA 100 & 75 Mounting ASM-CDV Quick Reference Guide...
ASM-CDV 1.4 System Overview 1.4.1 Front View POWER Connectors Label Function Note POWER Power on button LINE IN Line-in audio jack LINE OUT Line-out audio jack MIC IN Mic-in audio jack 1.4.2 Rear View 6 ASM-CDV Quick Reference Guide...
Page 7
DB-15 female connector RESET Reset button DC-IN DC Power-in connector HDD indicator HDMI HDMI connector System power indicator Wi-Fi USB Wi-Fi Module (optional) RESET Reset button 2 x USB 2.0 connector CRT connector DB-15 female connector ASM-CDV Quick Reference Guide...
Page 8
ASM-CDV 1.5 System Dimensions 1.5.1 Top and Front (Unit: mm) 8 ASM-CDV Quick Reference Guide...
Page 9
Quick Reference Guide 1.5.2 Bottom and Rear Side view (Unit: mm) ASM-CDV Quick Reference Guide...
Page 10
ASM-CDV 2. Hardware Configuration 2.1 Connector Setting, Driver and BIOS Installing Please refer to EBM-CDV Quick Installation Guide or User’s Manual. Note: If you need more information, please visit our website: http://www.avalue.com.tw 10 ASM-CDV Quick Reference Guide...
Step 3. Remove the top chassis. socket. Step 5-1. HDD installation: Connect the HDD to SATA connector via SATA cable, as Step 5-2. Place HDD and SATA cable as shown shown above. above for a proper installation of the HDD. ASM-CDV Quick Reference Guide...
Page 12
3 screws. to properly seat the HDD so as to match screws and HDD holes. Step 8. Reassemble the rear chassis and Step 7. Fasten 4 screws from the bottom chassis. fasten 3 screws to lock. 12 ASM-CDV Quick Reference Guide...