Editing 3D Clips Using Mpes-3D01 - Sony PMW-TD300 Operating Instructions Manual

To use a nonlinear editing system
For a nonlinear editing system, optional editing
software that corresponds to the recording
formats used with this camcorder is required.
Store the clips to be edited on the HDD of your
computer in advance, using the supplied
application software.
Some editing software may not operate properly.
Be sure to confirm before use that it conforms to
the recording formats used with this camcorder.
158

Editing 3D Clips using MPES-3D01

Editing 3D Clips using
MPES-3D01
You can adjust, convert, or perform other image
processing functions on 3D clips shot by the
camcorder using MPES-3D01 Stereo Image
Processor software. To edit using MPES-3D01
software, connect the HD/SD SDI OUT
connector of the camcorder to the input connector
of an MPE-200 Multi Image Processor running
MPES-3D01 software, using a BNC cable (sold
separately).