Attaching A Cbk-Vf01 Viewfinder - Sony PMW-TD300 Operating Instructions Manual

the viewfinder while you are carrying the
camcorder.
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
Viewfinder slide assembly
3
Attach the BKW-401 with the supplied
bolts.
Bolts supplied with the BKW-401
4
Adjust the front-to-back position so
that the arm of the BKW-401 does not
touch the handle when it is raised.

Attaching a CBK-VF01 Viewfinder

You attach the optional CBK-VF01 viewfinder in
the same way as the supplied viewfinder.
For details, see page 39.
Note
Bolts with
The CBK-VF01 cannot display images in 3D.
hexagonal
hole
Adjust position so that arm
does not touch handle
Attaching the Viewfinder 43