Adjusting The Viewfinder Focus And Screen; Using The Bkw-401 Viewfinder Rotation Bracket - Sony PMW-TD300 Operating Instructions Manual

To attach the hood
You can detach the viewfinder barrel or eyepiece
and attach a hood to make the image on the LCD
screen easier to see.
1
Slide the button on top of the viewfinder
to release the lock.
2
Align the protrusion on the top of the
hood with the groove on the viewfinder,
and then slide it horizontally.
3
Lower the hood and lock using the
bottom clip.
4
Open the hood and fasten in position.
42 Attaching the Viewfinder
Adjusting the Viewfinder Focus
and Screen
To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
Diopter adjustment ring
You can also attach a commercially available
protection filter, close-up lens, etc. that is 52 mm
in diameter.
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
1 PEAKING control
2 CONTRAST control
3 BRIGHT control
Using the BKW-401 Viewfinder
Rotation Bracket
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit