Sony PMW-TD300 Operating Instructions Manual page 139

MAINTENANCE
Menu items Sub-item
Genlock H Phase(HD)
Makes settings related
to genlock.
H Phase(SD)
Reference
ND Comp ND Offset Adjust
Makes settings related
to ND filter color
Clear ND Offset
compensation.
Although the
differences are very
slight, each of the built-
in ND filters has
different color
characteristics. When
you switch between ND
filters, the white
balance may be
disturbed. You can
correct for these slight
color differences
automatically by
registering
compensation values
for each filter.
Lens Auto FB Adjust
Executes lens
adjustment.
(see page 160)
Servo Gain
Config Start
Config Clear
Config Status
Settings
–999 to ±0 to +999
–99 to ±0 to +99
Internal/Genlock
On/Off
Execute/Cancel
Execute/Cancel
Normal/Mid/High
Zoom/Focus/Iris/Vertical
Axis/Cancel
Execute/Cancel
Zoom/Focus/Iris/Vertical
Axis/Cancel
Description
Specifies the H phase of HD output
when genlock is enabled.
Specifies the H phase of SD output
when genlock is enabled.
Displays the type of reference signal
used by the camcorder.
ND filter color compensation
function.
Clears ND filter color compensation
values (execute by selecting
Execute).
Executes auto flange back
adjustment (execute by selecting
Execute).
Specifies the vibration resistance
setting.
Note
As this setting can affect
convergence accuracy, select
[Normal] under normal
circumstances.
Starts specified lens error
adjustment for multiple points.
Clears specified lens error
adjustment values for multiple
points.
Displays lens error correction values
for multiple points.
Menu List 139