Sony PMW-TD300 Operating Instructions Manual page 138

MAINTENANCE
Menu items
White Filter
Makes settings related
to filters.
Auto Iris2
Makes settings related
to auto iris.
Flicker Reduce
In 2D mode, makes
settings related to
flicker reduction.
Reduces the flicker that
can occur when a
subject is shot under a
light source with a
periodically varying
brightness, such as
fluorescent lights, due
to the relationship with
the camcorder's
recording frame rate.
138 Menu List
Sub-item Settings
Electrical CC<D> 3200K/4300K/5600K/
6300K/-----
Iris Window 1/2/3/4/5/6/Var
Iris Window Ind On/Off
Iris Level –99 to ±0 to +99
Iris APL Ratio –99 to ±0 to +99
Iris Var Width 40 to 500 to 999
Iris Var Height 70 to 500 to 999
Iris Var H Position –249 to 0 to +249
Iris Var V Position –249 to 0 to +249
Iris Speed –99 to ±0 to +99
Clip High Light On/Off
Mode Auto/On/Off
Frequency 60Hz/50Hz
Description
Selects the color temperature for
when the electrical CC filter
switching function is assigned to an
assignable switch.
Select "----" if you do not want to
use D.
Selects the type of iris detection
window.
Var: Variable
Turns on or off the function that
displays a frame marker for the auto
iris detection window.
Adjusts the level of the auto iris
target value.
Adjusts the mix ratio of auto iris
detection peak value and average
value (available when OPERATION
>TLCS >Mode is set to [Standard]).
Adjusts the width of the detection
window when the setting of Iris
Window is VAR.
Adjusts the height of the detection
window when the setting of Iris
Window is VAR.
Specifies the horizontal position of
the detection window when the
setting of Iris Window is VAR.
Specifies the vertical position of the
detection window when the setting
of Iris Window is VAR.
Specifies the control speed (speed of
reaction to changes in the video).
(Larger values specify quicker
reaction times.)
Turns on or off the function that
disregards highlights and forces a
flatter reaction to high luminance.
Enables or disables flicker
reduction.
On: Always enabled.
Auto: Enabled when flicker is
detected.
Off: Disabled
Set to the frequency of the lighting
fixture that is causing the flicker.
(The factory default setting is 50 Hz
when the Country setting is
"PAL Area", 60 Hz when it is other
than "PAL Area".)