Chapter 5 : Clip Operations; Clip Playback; Thumbnail Screen - Sony PMW-TD300 Operating Instructions Manual

Solid-state memory 3d camcorder
Hide thumbs Also See for PMW-TD300:
Table of Contents

Advertisement

5
Clip Operations
Chapter

Clip Playback

A thumbnail screen appears if you press the
THUMBNAIL button in E-E or playback mode.
Thumbnail screens display lists of the clips stored
on SxS memory cards in the form of index
pictures. (A message appears if you insert a
memory card that contains no clips.)
The thumbnail screen displays the content of
memory cards inserted in the left slots. (If the
THUMBNAIL button is pressed when memory
cards are inserted in right slots only, the all clips
thumbnail screen for the memory cards in the
right slots is displayed.)
You can select any clip (see page 93) in a
thumbnail screen and start playback of that clip
(see page 93).

Thumbnail Screen

In thumbnail screens, the timecode of the index
picture appears beneath the thumbnail for each
clip. (An OK mark also appears when a clip has
been marked with an OK mark.)
Note
Normal thumbnail screens only display clips in the
recording format configured in the camcorder (clips that
match all the Rec Format, HD System Line, System
Frequency, and Country settings under OPERATION
>Format in the setup menu (see page 106)).
If you want to display all recorded clips, switch to the all
clips thumbnail screen. However, it is not possible to
start playback from the all clips thumbnail screen (see
page 96).
Clip Playback
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents