Sony PMW-TD300 Operating Instructions Manual page 109

OPERATION
Menu items Sub-item
Output SDI Signal(R)
Makes settings related
to output signals.
HDMI Output
HDMI Signal
SDI/HDMI Out
Super
Video Out Super
Settings
R/L/L+R/L-R/Side By
Side/Anaglyph
On/Off
Side By Side/L/R/L+R/
L-R/Anaglyph
On/Off
On/Off
Description
Selects the output format from the
HD/SD SDI OUT(R) connector
when the Signal Format setting is
HD and the SDI Signal(L) setting is
3G.
R: 1.5G SDI right signal output.
L: 1.5G SDI left signal output.
L+R: 1.5G SDI L+R format signal
output.
L-R: 1.5G SDI L-R format signal
output.
Side By Side: 1.5G SDI side-by-
side format signal output.
Anaglyph: 1.5G SDI anaglyph
output.
Turns on or off the output of signals
from the HDMI connector.
Selects the output format from the
HDMI connector when the Signal
Format setting is HD.
Side By Side: In 3D mode, side-by-
side format signal output. In 2D
mode, left signal output.
L: Left signal output
R: Right signal output
L+R: In 3D mode, L+R format
signal output. In 2D mode, left
signal output.
L-R: In 3D mode, L-R format signal
output. In 2D mode, left signal
output.
Anaglyph: Anaglyph output.
Turns on or off the superimposition
of text information on the output of
the HD/SD SDI OUT and HDMI
connectors.
Note
Text information is displayed correctly
only when SDI Signal (L), SDI Signal
(R), and HDMI Signal is set to "L".
Turns on or off the superimposition
of text information on the output of
the VIDEO OUT connector.
Note
This setting cannot be selected when
the Signal Format setting is 480P or
576P, or when the System Frequency
setting is 23.98P, the Rec Format
setting is HQ1920 or HQ1440, and the
23.98P Output setting is HDMI(P).
Menu List 109