Displaying The Grid - Sony PMW-TD300 Operating Instructions Manual

Solid-state memory 3d camcorder
Hide thumbs Also See for PMW-TD300:
Table of Contents

Advertisement

To display the edge violation warning in the
viewfinder
1
Set OPERATION >3D Guide >Edge
Violation in the setup menu to On.
2
Set 3D Guide >Depth Warning VF in
the setup menu to On.
Notes
• Edge violation warnings cannot be displayed in the
viewfinder if Depth Warning VF is set to Off.
• The warning may not be displayed correctly,
depending on the subject. Use this function as a guide
when shooting in 3D.
• The edge violation indicators cannot be displayed in
viewfinders other than the supplied viewfinder.
To display the edge violation warning on a
monitor
1
Set OPERATION >3D Guide >Edge
Violation in the setup menu to On.
2
Set the following parameters for the
corresponding monitors that are to
display the edge violation warning to
On using OPERATION >3D Guide in
the setup menu.
• Depth Warning SDI(L)
• Depth Warning SDI(R)
• Depth Warning HDMI
Notes
• Edge violation warnings are not displayed on a
monitor if the 3D depth warnings are not set for
display.
• The edge violation warning displayed in the
viewfinder and on a monitor may vary slightly. Use as
a guide when shooting in 3D.
90
3D Shooting Guide Function
You can display a grid when shooting in 3D to
easily check the left/right parallax.
To display the grid in the viewfinder, set
OPERATION >Grid >Grid(VF) in the setup
menu to On.
The grid display can be switched On and Off
during recording by using an assignable switch
Warning indicators
with the Grid (VF) function assignment.
The grid cannot be displayed when the viewfinder
display select switch is set to 3D.
To display the grid on a monitor
Set the following parameters for the
corresponding monitors that are to display the
grid to On using OPERATION >Grid in the setup
menu.
• Grid(SDI(L))
• Grid(SDI(R))
• Grid(HDMI)
The grid is not displayed on a monitor under the
following conditions.
• SD signal output to the monitor
• Side-by-side output to the monitor
• 3G SDI signal output on the HD/SD SDI OUT(L)

Displaying the Grid

Note
Note
connector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents