Exit Navigator Control - Teleflex 301 Owner's Manual

Section
A
5c. FOR NAVIGATION
NMEA 0183 OUTPUT
To
i) Engage Navigator Control: After checking and, if
necessary, reducing cross track error, press
PILOT".
The vessel is now under navigator control.
a
ii) On Reaching
all
the information required
next track automatically without any action on your part.
If
your vessel does not do this when the waypoint alarm
on the navigation receiver sounds, check
plier of your Navigation Receiver to see whether the
*
contains one of the Sentences containing "Heading to
Waypoint" and "Waypoint Number".
instructions under NMEA
data
available.

6. EXIT NAVIGATOR CONTROL

To exit navigator control without exiting autopilot mode,
AUTOPILOT.
press
D
on your present heading.
To exit navigator control and return to manual control,
STANDBY/ ON.
press
"HEAD 000".
RECEIVERS
a 0183
Waypoint: Most
for
the craft to turn to the
If
0180 0182
or
You then return to compass control
The display will change to
WITH
"NAV
outputs have
with
the sup-
data
not, follow the
depending on
Operating Instructions