Table of Contents
Advertisement
PILOT PRESET
OPERATION
Section A
.
Sea State adjustments set the pilot's operating points.
.
They are: the pilot presets, rudder sensitivity, response
.
and PWM. Press the ADJUST SELECT button repeat-
edly until
reach the adjustment you require.
you
The
selection
first
programmable presets available for fast and slow speed
.
operation. Normally, this
Press "ADJUST SELECT" once. The display reads "SET
FAST"
"SET SLOW".
or
.
To select
the
other set of PILOT presets, press DISPLAY/
.
SET.
If, and only if, the factory preset positions do not operate
your
as well as
vessel
optimize the
settings
should optimize the boat's operation in your normal low
speed operating range. To record the changes press the
POWER OFF button.
Next, turn the pilot back on, and select PILOT preset
"FAST" to optimize the settings for your normal high
speed operation. Again turn off the
the settings.
.
Now, all you have
.
"FAST" or "SLOW".
Please note
when you shut the pilot o f f using the
that
O F F
POWER
button, whatever adjustments are
use will be stored in the preset memory. Example:
"SET
are in
FAST", the settings of all the controls are
.
saved in memory position "FAST". If you are in
SLOW", the settings of all the controls are saved in
memory "SLOW".
the Pilot preset. There are two user
is
the only adjustment required.
is
expect,
may choose to
you
you
yourself. In "SET SLOW" mode
power to
do
select PILOT preset mode
to
you
record
current
in
you
if
"SET
Operating Instructions
Advertisement
Table of Contents
