Teleflex 301 Owner's Manual page 26

Section A
301
The Teleflex can
a
from radio navigation receiver such
SATNAV or DECCA system that has a compatible
output. Formats supported are: NMEA 0180, NMEA
0183.
0182 and NMEA
The
data format from your Navigation Receiver deter-
method
mines the the autopilot may
Navigator mode. The Navigation Receiver can only
supply the required
programmed with the required destination and way-
points. The basic data needed from the Nav Receiver
includes:
1. Cross track error.
(60
nautical mile feet) to port or starboard.
2.
Heading to next waypoint.
3.
Next waypoint number.
The type of data from the navigation receiver varies
depending on the data output format of your Navigation
Receiver.
Cross
track error
Heading to waypoint
Waypoint number
to get full
In order use o f the interface,
understand the principles
to use
very simple the heading to the next waypoint
Navigation Receiver but this would
calculated by
the
very dangerous when you are close
could cause the vessel to run aground.
Autopilot is quite happy to give you a course
be
controlled with data received
as a
be
data
to the autopilot if
This
is expressed in hundredths
0180 0182
X X
X
of
control used. It would
to land, as tidal
LORAN,
operated in
is first
it
of
a
0183
X
X
X
is important to
it
be
be
offset
As
illustrated, the