Table of Contents
Advertisement
MAIN
SWITCH
FUNCTIONS
.
.
.
.
.
.
.
.
.
.
POWER
OFF:
Shuts off the power.
STANDBY/ON: Turn on the autopilot.
the autopilot self tests, the display will read
After
"HEAD
OOO" (The three zeros represent the numeric di-
rection information), displaying the compass direction
an error code. If an error c d e appears, check page 4
C
Section
for an explanation.
If the Teleflex 301 is
mode push this button to return to Standby and return
to "HEAD
the display
AUTOPILOT: Press this button to engage compass
controlled autopilot operation on the course that was
shown on the display. The display reads "AUTO
and gives the heading steered.
LEDs
The arrow shaped
the vessel
has
tion
in the opposite direction to return yw to course. When
both LEDs light
you
If
the system is in Navigator mode, push the
"AUTOPILOT" button to change the operation from
Navigator control to compass control on the compass
heading the boat was set for at the instant you pressed
the AUTOPILOT button.
any operating or adjustment
in
ooo".
will light, indicating the direc-
drifted o f f course. The autopilot steers
are on course.
operating instructions
or
ooo"
Advertisement
Table of Contents
