Acorp 6M810E User Manual page 7

The main board has 2 dual in-line memory modules (DIMM) which can be
installed with PC-100 SDRAM memory(PC-133 with i810E Chipset only). The
memory subsystem supports up to 512 MB SDRAM of non-buffered 3.3V using
standard 168-pin DIMM sockets.
The main board is strengthened with Power Management Wake up Event such as
"Modem ring on" which is the new invention to enable PCs to be turned on via
the network or modem function. These are also key benefits in PC operation, asset
management, new system setup and power conservation.
In addition to the above hardware features, this main board is Jumperless design
which allows user to set CPU frequency through BIOS. With this design, the
disadvantages of setting hardware CPU jumpers are improved to a better and
easier procedure through BIOS.
In conclusion, the system chipset and design make the main board a high
performance, cost-effective, and energy efficient main board which meets a
variety of price/performance levels. The main board is an ideal platform for the
increasing requirements of today's and future's desktop applications.
CPU Installation
This model is a jumperless main board, there is no selector needed for CPU
frequency selection,, Please load optiomized Defaults in the CMOS setting,.
The main board will automatically detect CPU frequency (66/100/133 MHz)
6M810E Main Board 2