Acorp 6M810E User Manual page 34

SECOND BOOT DEVICE
This category determines which drive the system searches first. System will
search in turn for floppy disk drive; then hard disk drive, and finally Floppy drive.
Default value is "HDD-0". Options are as below:
FLOPPY; LS120; HDD-0; SCSI; CDROM; HDD-1; HDD-2; HDD-3;
ZIP100; LAN; Disabled
THIRD BOOT DEVICE
This category determines which drive the system searches first. System will
search in turn for floppy disk drive; then hard disk drive, and finally Floppy drive.
Default value is "LS120". Options are as below:
FLOPPY; LS120; HDD-0; SCSI; CDROM; HDD-1; HDD-2; HDD-3;
ZIP100; LAN; Disable
BOOT OTHER DEVICE
:Enabled(default)
:Disabled
SWAP FLOPPY DRIVE
:Enabled: floppy A&B will be swapped.
:Disabled(default): floppy A&B will not be swapped.
BOOT UP FLOPPY SEEK
BIOS will determine if the floppy disk drive is 40 or 80 tracks. 360k type is 40
tracks while 720K/1.2M and 1.44M are all 80 tracks. Default value is enabled.
:Enabled
:Disabled (default)
BOOT UP NUMLOCK STATUS
:On (default)
:Off
GATE A20 OPTION
:Normal
:Fast (default)
6M810E Main Board 29