Supervisor/User Password - Acorp 6M810E User Manual

3-1-8 Supervisor/User Password

The "Supervisor/User Password setting" utility sets the security protection. There
are two kinds of password functions in the setup menu : one is "Supervisor
Password," and the other is "User Password." Their difference is:
Supervisor Password: this function allows you the right to change the options of
setup menu.
User Password: this function only allows you to enter the setup menu but not to
change the options of the setup menu except "USER PASSWORD," "SAVE &
EXIT SETUP," and "EXIT WITHOUT SAVING."
1. How to set "Supervisor Password" & "User Password"
The setup of "Supervisor Password" and "User Password" has the same steps.
Step 1: Enter Password --Press <Enter> after appointing the password.
6M810E Main Board 44