Acorp 6M810E User Manual page 50

Step 2: Confirm Password
Type the password again and press <Enter>
.
If you forget password, please clear CMOS.
(refer to jumper RTC1)
Step 3: Set "Security Option" in "BIOS Features Setup"
After setting password, enter "Security Option" in "BIOS Features Setup." There
are 2 options "Setup" & "System." "Setup" will only secure CMOS setup through
password. "System" is to secure PC sytem and password is required during
system boot-up in addition to CMOS setup.
6M810E Main Board 45