Acorp 6M810E User Manual page 42

AC97 MODEM
:Auto
:Disabled(default)
IDE HDD BLOCK MODE
:Enabled(default)
:Disabled
POWER ON FUNCTION
:Any Key
:Button Only(default)
:Keyboard 98
:Password
:Hot Key
:Mouse Move
:Mouse Click
KB POWER ON PASSWORD
:enter (default)
HOT KEY POWER ON
:Ctrl-F1 (default) ~ Ctrl-F12
ONBOARD FDC CONTROLLER
Select Enabled if your system has a floppy disk controller(FDC) installed on the
system board and if you wish to use it.
:Enabled (default)
:Disabled
ONBOARD SERIAL PORT 1
Select an address and corresponding interrupt for the first serial port.
:Auto (default)
:2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, Disabled
ONBOARD SERIAL PORT 2
Select an address and corresponding interrupt for the second serial port.
:Auto (default)
:2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, Disabled
UART MODE SELECT
:Normal (default)
:IrDA
6M810E Main Board 37