Pnp/Pci Configuration Setup - Acorp 6M810E User Manual

3-1-6 PNP / PCI Configuration Setup
RESET CONFIGURATION DATA
:Disabled(default)
:Enabled--- to reset "Extended System Configuration Data(ESCD) when you
exit setup if you have installed a new add-on card and the system reconfiguration
has caused such a serious conflict that the operating system can not boot up.
RESOURCES CONTROLLED BY
:Manual
The table will show the below items: IRQ-3 ~ IRQ15 assigned to PCI
DEVICES. The user can adjust the shown items as required.
:Auto (ESCD)
The table will not show the above items, and the system will automatically assign
the above setup.
PCI/VGA PALETTE SNOOP
:Disabled (default)
:Enabled
6M810E Main Board 42