Grinding Wheels - DeWalt D28065 Instruction Manual

6" (152 mm) Grinding Wheels
4-1/2" (114.3 mm) and 5" (127 mm)

Grinding Wheels

Type 27 guard
Type 27 guard
Type 27 guard
Type 27 guard
3" (76 mm) diameter
stamped steel
1-11/16" (43 mm)
backing flange
diameter quick-change
Type 27 hubbed wheel
backing flange
Type 27 hubbed wheel
Type 27 depressed
Type 27 depressed center wheel
center wheel
threaded clamp nut
Attaching Side Handle (Fig. 2)
FIG. 2
The side handle (I) can be fitted to either side of the
I
gear case in the threaded holes, as shown. Before
using the tool, check that the handle is tightened
se cure ly. Use a wrench to firmly tighten the side
handle.
9